Heatwave Anchor Plug Kits


Kits include:

  • Plastic cable clips
  • Wood Anchors
  • Nails


The Heatwave Anchor Clips kits are an alternative to the Heatwave strapping to anchor Heatwave cable to a floor.  Each 90 degree bend and each 180 degree turn requires two Heatizon
Plastic Clips. Heatizon Plastic Clips should be spaced approximately every 24 inches along the length of the Heating cable. Heatizon Plastic Clips can be inserted around Heatwave® Heating Cable, and secured to sub floor by hammering nail or driving a screw through anchor ends until both plastic tails are flat against sub floor surface. Repeat with each Heatizon Plastic Clip until all clips are secure.

Additional information

Weight .5 lbs
Dimensions 9 × 6 × 1 in